Porcelain Tiles – Step-By-Step Guide To Drilling Porcelain Tiles

by Wall Tiles Online on 6:58 am

Porcelain TilesPorcelain Tiles – Step-By-Step Guide To Drilling Porcelain Tiles

Would you like to understand how is drilling porcelain tiles carried out? This short article will help you by giving easy steps that would be crucial in your drilling task. Drilling porcelain tiles will be necessary should you wish to put up equipments in your bathroom or any other room that’s got porcelain tiles. For example, by drilling the porcelain tiles, you’ll be able to put bathroom shaving cabinet, a mirror, soap dish, towel rails, or even your beauty products holder.

To start your drilling activity, you need to first know what kind of supplies you’ll require to carry out the work. Here are the tools you’ll require:

RCD Breaker

Drill Bits of Diamond Core (Premium Quality)

Masonry Drill Bits (Bundled w/ quality drill bits)

Drill Bit of Carbide Pilot ( this can be used if you’ll drill 13-mm hole or bigger holes)

Equipment for Water Cooling

Drilling Device

Safety Glasses or Goggles

These materials can be bought in different stores. You can simply purchase these before proceeding to your drilling activity. You should make sure of the standard of the tools first to ensure the output of the drilling will be appropriate for your requirement.

Yet another thing that you need to take into consideration with drilling porcelain tiles is the hole sizes you are about to create. It is fairly important for the size or diameter of the hole determines how large the drill bit you’re going to use.

After establishing the diameter of the holes you are about to drill and preparing the instruments you’ll need for the drilling, you can start to commence drilling your porcelain tiles. Be sure to wear your safety goggles to keep your eye clear of dirt not to mention avoidance of electric shock with RCD.

These proceeding steps would be for holes about 10mm or less in diameter with diamond cores.

1. Put an indication to the hole’s center. Either use a sticky tape or simply a lead pencil.

2. Look for the right size of the diamond core bit. After that, attach it to the electric drill. Be sure there’s a supply of water from any cooling gear is at a constant. (Water cooling equipment is essential in keeping it certain that there exists a constant cool temperature in the diamond core bit and will also prevent debris when drilling the hole. Don’t use handheld aspirator or wet sponge, for these never give adequate coolant to the diamond core bit.)

3. Your drill needs to be positioned between 1000 & 1500 rpm. Choosing the marker as a marking tool, it is ideal to implement the “Leaning In” method.

*Method of Leaning In- With an angle, you’ll begin to drill. When you see the drill cuts the tile, your drill must be in horizontal position. Ensure that there is enough pressure laid and turn the drill till the hole is completely drilled.

*Method using Sticky tape- Put sticky tape on the wall where you want the hole. This’ll help to prevent the drill bit from sliding.

4. Tip- I picked up an excellent tip from www.tfo.com.au. Once the hole has started, don’t use too much pressure let the drill do the work.

{ 0 comments… add one now }

Leave a Comment

Previous post:

Next post: